Bumper Pull vs. Fifth Wheel Toy Hauler: Which Used One Fits Your Toys?

Compare bumper pull and fifth wheel toy haulers by truck requirements, garage layout and living space, then use the measurement, condition and weight checklists to ask the seller useful questions before arranging a drive.

By Gently Used RVs Editorial ·

Toy hauler with the rear ramp down and a side-by-side UTV in the garage, parked in the desert.

Direct answer: A fifth wheel toy hauler carries heavier pin weight and needs a properly rated pickup, while a bumper pull toy hauler uses a conventional hitch and, on heavier units, a weight-distributing setup. Which one fits depends on your truck, the length of your toys and how much living space you want, not on the type name. Gently Used RVs is where buyers compare seller-provided photos, garage details, prices and locations, then message the seller directly. It does not inspect, verify or guarantee any unit, and it does not take payment for the RV.

Updated: [PUBLISH DATE]

A buyer finds a used toy hauler listed at a workable price, drives four hours, then discovers the side-by-side will not clear the door opening, or the ramp rating is below the machine's loaded weight. The garage might fit, but the truck may not have enough payload for the loaded pin weight. The cost can be a trailer that cannot carry the toys, an unplanned truck upgrade or another trip to a scale after the purchase.

Gently Used RVs gives buyers one place to review those seller-provided details and ask the garage and truck-fit questions before making a trip. Browse current toy haulers for sale, then independently confirm the trailer, the truck ratings, the seller and the condition. Private sellers can list for free.

What is the real difference between a bumper pull and a fifth wheel toy hauler?

A bumper pull connects to a conventional receiver behind the truck. Heavier units may require a weight-distributing hitch. A fifth wheel connects to a hitch mounted in the pickup bed near the rear axle; it places more load on the truck as pin weight and takes up the bed. The over-axle connection can track steadily and may be easier to back, depending on the driver and setup.

FactorBumper pullFifth wheel
Truck needsConventional receiver and hitch setup matched to the trailerPickup with compatible bed-mounted fifth-wheel hitch
Hitch or pin weightTongue weight at the rear receiverHigher pin weight carried through the bed hitch
Typical lengthOften shorter, but garage and floorplan varyOften longer, but garage and floorplan vary
Garage layoutVaries by model; check the exact opening and floorVaries by model; check the exact opening and floor
Living spaceMay offer less living space in a similar overall lengthOften uses the raised front area for living space
Price expectationOften a lower entry cost, depending on age and conditionOften costs more, depending on size, equipment and condition

These are general comparisons, not specifications for a particular trailer. Use its labels, manufacturer documentation and the truck's ratings to check the actual fit.

How do I know my side-by-side, ATVs or bikes will actually fit?

Measure the machine and the trailer. Do not rely on a floorplan drawing or the vehicle's body-only specification.

  • Measure garage length and width, plus the door opening's clear width and height. Compare the opening with the widest and tallest parts of the machine, including mirrors, tires, racks and accessories.
  • Ask for the ramp door's rating label. Compare its stated limit with the machine's loaded weight, including fuel, rider and gear. Check the garage floor's own limits in the trailer documentation as well.
  • Check whether the floor is flat or stepped, where the D-rings are, how many there are, and whether their condition and placement work with the machine's tie-down points.
  • For a lifted UTV, check overhead clearance. With the machine in place, confirm there is room to close the ramp and walk through the garage.

Take a tape measure to the unit and, if possible, bring the machine. Ask the seller what they have actually loaded into the garage.

What should I check on the truck side?

Check the truck's available payload after passengers, cargo and hitch hardware. Tongue weight or pin weight uses that payload too. Read the door-jamb labels and confirm the truck's GVWR, front and rear GAWR, tire ratings and applicable hitch ratings. A receiver and weight-distribution hitch must be rated for the bumper-pull setup. For a fifth wheel, confirm bed length, hitch fitment and cab clearance; a short bed may require a compatible slider hitch.

As a planning range, Chevrolet's 2026 Trailering Guide gives 10–15% of loaded trailer weight for conventional tongue weight and 15–25% for fifth-wheel pin weight. When the truck is towing at its maximum trailer weight, that guide uses a 10% planning figure for conventional tongue weight and 15% for fifth-wheel pin weight. Follow the specific truck and trailer documentation, and check every rating. The garage load can change the trailer's balance, so recheck tongue or pin weight with the toys loaded. For the full payload calculation, walk through how much travel trailer your truck can tow, which works the door-jamb sticker, the tongue-weight percentage and the trailer GVWR step by step. See also RV Towing Capacity Explained.

Which type suits which trip?

A bumper pull may suit buyers who want to keep the truck bed free, prefer a lower entry cost or already have a conventional hitch setup. A fifth wheel may suit buyers who tow often, want more living space in a given overall length and own a pickup rated for the truck and trailer combination. The fifth wheel takes up the bed; a bumper pull requires the right receiver and hitch setup. Neither type fits every truck or travel plan.

What should I check on a used toy hauler?

  • Ramp door hinges and seals: Check for hinge play, rust around the hinge tube, seal gaps at the sides and bottom, and whether the ramp latches square.
  • Ramp lift system: Ask the seller to operate the springs, cables or lift assist. Note binding or uneven movement.
  • Garage floor: Look for oil stains, soft spots, delamination, gouges and signs that a machine was dragged across it.
  • Fuel and fume odors: Notice strong smells in the living area. Ask about fuel-station leaks and the seal between the garage and living space.
  • Garage separation: Check the wall between the garage and living area, including the door or hatch and its seal.
  • Ventilation: Test the garage exhaust fan, if fitted, and ask how the garage is ventilated.
  • Fuel station: If fitted, ask the seller to demonstrate the pump and check the nozzle, hoses and connections for leaks.
  • Generator: If fitted, record its hours and ask to see it run under load. Note where the exhaust terminates.
  • Roof and seals: Look for damage and signs of water entry, especially above the garage and around the ramp opening.
  • Axles and tires: Check axles, leaf springs, hangers and tire date codes. Look for bent parts, flattened springs, uneven tire wear or visible damage.
  • Tie-downs: Check each D-ring for looseness, damage or signs it has pulled through the floor.
  • Living area: Check the interior, furnishings and systems for wear or damage; toy haulers can see heavy use.
  • Records: Ask for service, roof-maintenance and axle-work records, plus warranty-transfer information if applicable.

What should I ask the seller before I drive out?

Ask what machine they have fit in the garage and whether they measured the garage and opening. Request photos of the garage with a tape measure in view, the ramp-rating label, D-rings, floor and ceiling above the garage. These details help compare your machine's dimensions and loaded weight with the available space and ratings.

Also ask whether the fuel station works, the generator's hours, and whether the seller has noticed issues with the ramp, roof, axles or springs. Request clear close-ups of any repairs or damage and copies of available records. Photos and seller notes are useful starting points; they do not replace an in-person review.

What is the weight math I should do before I commit?

Illustration only, not a truck or trailer rating: Start with a fictional pickup payload of 2,000 pounds. Subtract 500 pounds for passengers and gear, then 200 pounds for fifth-wheel hitch hardware. That leaves a 1,300-pound pin-weight budget. Using a 20% pin-weight planning figure, 1,300 ÷ 0.20 = 6,500 pounds of estimated loaded trailer weight. A fictional trailer with an 8,000-pound GVWR would exceed that payload-based estimate if loaded to its GVWR.

This screening math does not approve a towing combination. Check the truck, trailer, hitch, axle and tire ratings. Weigh the loaded truck and trailer by axle, and recheck tongue or pin weight with the toys and travel gear aboard.

When is an independent inspection worth it?

Arrange an independent inspection for any unit under serious consideration, especially if the garage floor or ramp shows damage, the roof has been repaired, records are limited or the trailer was stored outside. Book the inspector directly and confirm the inspection covers the ramp, garage floor, axles and systems. Our pre-purchase RV inspection guide covers what a walkthrough can and cannot tell you.

Gently Used RVs does not inspect, verify or guarantee any unit, and does not take payment for the RV. Buyers and sellers communicate directly. Review the scam awareness guide for transaction precautions.

Where do I compare used toy haulers?

Search used toy haulers to compare seller photos, garage details, price and location, then contact the seller by phone or email from the listing with the questions above before driving out. Gently Used RVs lists 8+ RV types.

For the fifth-wheel-specific basics, from pin weight to hitch setup and what to inspect on that type, read what to check before buying a used fifth wheel. If you are still deciding between body styles, choosing among the 8+ RV types covers the wider comparison.

Private sellers can list a toy hauler for free. The free listing stays live until sold or deleted, includes a 20-mile radius and has no commission when it sells. A $0.99 bump moves it to the top of its tier for 24 hours. Check current listing details before selecting an option. There are 470,000+ members across our RV groups, and toy hauler owners there are usually candid about what actually fits in their garage.

For towing-course fundamentals on hitch setup, braking and backing, see TowPro Academy's online towing course ($99). Read about the RV towing course.

Gently Used RVs may earn a commission if you buy through this link.

Frequently asked questions

Is a fifth wheel toy hauler easier to tow than a bumper pull?

The over-axle hitch can provide steady tracking and may be easier for some drivers to back. A fifth wheel also places more load on the pickup as pin weight and occupies the bed. Compare the particular truck, hitch, trailer and loaded weights before deciding which setup works.

How much garage length do I need for a side-by-side?

There is no single length that fits every side-by-side. Measure the machine, including accessories, and compare it with the garage's clear length, width, door opening and overhead clearance. Confirm the ramp and floor ratings too. Ask the seller to measure the actual unit, not quote only a brochure floorplan.

What does a ramp door weight rating mean?

It is the manufacturer's stated limit for the ramp door. Find the rating on the unit's label or in its documentation, then compare it with the loaded machine and any other load specified by the manufacturer. Do not assume the ramp rating is the same as the garage floor or trailer cargo limit.

Can a half-ton truck tow a toy hauler?

It depends on the specific truck and trailer. Compare available payload, hitch or pin weight, GVWR, axle ratings, tire ratings and hitch ratings. A tow rating alone does not show whether there is enough payload for passengers, gear, hitch hardware and the trailer's load.

Do toy haulers hold their value?

Resale depends on the particular unit, its age, condition, equipment, records and local buyer demand. Do not rely on a broad rule or a listing price alone. Compare current listings, review the unit in person and account for any work identified by an independent inspector.

Sources

  • Chevrolet, 2026 Trailering Guide, tongue and fifth-wheel pin-weight planning ranges; accessed November 20, 2026.
  • National Highway Traffic Safety Administration, DOT HS 809 433, "Towing a Trailer," April 2002.
  • 49 CFR 571.110, FMVSS No. 110, current edition accessed November 20, 2026.

Chris Allen, Founder, Gently Used RVs
Date published: [PUBLISH DATE]
Date updated: [PUBLISH DATE]
Chris Allen has experience in RV sales, sales-floor management, and as a manufacturer rep. He works with 470,000+ members across our RV groups.

Gently Used RVs is a used-RV marketplace for private sellers and dealerships at gentlyusedrvs.com.